Consult factory for LED options
The AP-35-D series is a direct version of a family of beveled steel luminaires. AP-35-D is designed with direct distribution for suspended or surface mounting. The series can be mounted individually, in perfectly aligned continuous rows or patterns, and is available with a variety of down light shielding options. The AP-35-D series is an ideal solution for smaller spaces with lower ceiling heights.
HOUSING: Two-piece, die-formed, 20-guage cold rolled steel welded construction forming a 3 1/2" x 9" beveled profile. Finished end caps are laser cut 18-gauge cold rolled steel, with no exposed hardware or knockouts. Adjustable mounting brackets provide precision alignment of continuous rows.
REFLECTOR: Die-formed, 20-gauge cold rolled steel finished in high gloss baked white enamel.
SHIELDING: Parabolic louver is semi-specular low iridescence aluminum 11/4"x4" O.C. with 12 cells per 4' section. Four spring clips secure snap in baffle including two tethers.
ELECTRICAL: Ballast is electronic, low profile, universal voltage 120/277, high power factor, thermally protected, sound rated A with less than 10% total harmonic distortion. Pre-wired with integrated locking disconnects. The minimum number of ballasts will be used unless otherwise specified.
MOUNTING: Standard installation is an adjustable self-locking aircraft cable assembly 48" x 3/32" in diameter with 5" canopy. One 16/4 SJT straight 54" cord is supplied with each power feed. Standard pendants are available in 24" lengths.
FINISH: Fixture housing and steel components are finished in baked white enamel applied over a five-stage pretreatment process.
LAMPS: Fixtures are provided for use with one, two or three T8, T5 or T5HO lamps (supplied by others).
CERTIFICATION: Luminaires are cULus listed and Union Made in the United States of America. I.B.E.W.